# man -t 5 passwd > passwd_manual.ps # ps2pdf14 passwd_manual.ps passwd_manual.pdf \
FrontPage › king/2004-11
Nov 30, 2004 ¶
man page to pdf ¶
Submitted by king @ 11-30 [09:55 pm]
/etc/make.profile 새로 거는법 !!! ¶
Submitted by king @ 11-30 [06:31 pm]
cd /etc/ rm make.profile ln -s ../usr/portage/profiles/default-linux/x86/2004.3 make.profile \
emerge sync 오류 ¶
Submitted by king @ 11-30 [05:52 pm]
wrote 14361 bytes read 3740411 bytes 33081.69 bytes/sec
total size is 78789417 speedup is 20.98
>>> Updating Portage cache... ...done!
Performing Global Updates: /usr/portage/profiles/updates/4Q-2004
(Could take a couple of minutes if you have a lot of binary packages.)
.='update pass' *='binary update' @='/var/db move'
s='/var/db SLOT move' S='binary SLOT move' p='update /etc/portage/package.*'
..........................................s
** Skipping packages. Run 'fixpackages' or set it in FEATURES to fix the
tbz2's in the packages directory. Note: This can take a very long time.
* IMPORTANT: 42 config files in /etc need updating.
* IMPORTANT: 13 config files in /usr/X11R6/lib/X11/xkb need updating.
* Type emerge --help config to learn how to update config files.
\iwlist scanning result ¶
Submitted by king @ 11-30 [03:41 pm]
eth1 Scan completed :
Cell 01 - Address: 00:02:8A:A8:9C:15
ESSID:"dpsdpdlcldps_ap1"
Protocol:IEEE 802.11b
Mode:Master
Channel:6
Encryption key:on
Bit Rate:11 Mb/s
Extra: Rates (Mb/s): 11
Extra: Signal: -60 dBm
Extra: Last beacon: 14ms ago
Cell 02 - Address: 00:02:8A:9E:50:74
ESSID:"dpsdpdlcldps_ap1"
Protocol:IEEE 802.11b
Mode:Master
Channel:6
Encryption key:on
Bit Rate:11 Mb/s
Extra: Rates (Mb/s): 11
Extra: Signal: -75 dBm
Extra: Last beacon: 15ms ago
Cell 03 - Address: 00:02:8A:9E:51:D0
ESSID:"dpsdpdlcldps_ap1"
Protocol:IEEE 802.11b
Mode:Master
Channel:6
Encryption key:on
Bit Rate:11 Mb/s
Extra: Rates (Mb/s): 11
Extra: Signal: -49 dBm
Extra: Last beacon: 14ms ago
Cell 04 - Address: 00:02:8A:9E:50:AE
ESSID:"dpsdpdlcldps_ap1"
Protocol:IEEE 802.11b
Mode:Master
Channel:3
Encryption key:on
Bit Rate:11 Mb/s
Extra: Rates (Mb/s): 11
Extra: Signal: -54 dBm
Extra: Last beacon: 18ms ago
\Nov 29, 2004 ¶
Nov 28, 2004 ¶
Thinkpad wheel button on linux ¶
Submitted by king @ 11-28 [03:48 pm]
굵게표시된 부분만 추가해준다
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
# 아래 1줄 추가
InputDevice "USB Mouse" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
...
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
# 아래 4줄추가
Option "Emulate3Buttons""true"
Option "Emulate3Timeout" "50"
Option "EmulateWheel" "true"
Option "EmulateWheelButton" "2"
EndSection
# 아래항목 다 추가
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
\
Nov 27, 2004 ¶
Nov 26, 2004 ¶
Submitted by king @ 11-26 [10:47 am]
Nov 25, 2004 ¶
양파옹이 준 php 소스 ¶
Submitted by king @ 11-25 [06:00 pm]
http://onionmixer.net/~onion/test1.php
echo 문을 활용한 hello world
http://onionmixer.net/~onion/test2.php$default_var 변수에 문자열을 대입해서 echo 한 hello world
http://onionmixer.net/~onion/test3.php문자열을 이어줄때 사용되는 연산자 "."
http://onionmixer.net/~onion/test4.php변수를 더할때 사용되는 연산자 "+"
http://onionmixer.net/~onion/test5.php변수를 "" 로 묶어도 변수로 인식하는 예제
http://onionmixer.net/~onion/test6.php문자열과 변수를 더했을때 결과는 "변수"만 남음
http://onionmixer.net/~onion/test7.phptest6.php 예제를<html>, <body>, 으로 묶은 예제
http://onionmixer.net/~onion/test8.phpfor문과 "++" 연산자를 사용해서 1부터 10까지 줄바꿈해가면서 출력하는 예제
http://onionmixer.net/~onion/test9.phptest8.php 예제를 <php echo(" <html> <body>"); 로 묶고 닫은 예제
http://onionmixer.net/~onion/test10.phptest9.php 예제에 echo 문을 추가한 예제
http://onionmixer.net/~onion/test11.phpif, else 문을 이용하여 True, False 값 얻어내는 예제
http://onionmixer.net/~onion/test12.phpwhile 문을 이용하여 1부터 10까지 줄바꿈해가면서 출력하는 예제
http://onionmixer.net/~onion/test13.php$_GET 을 이용한 if , else 문 예제
http://onionmixer.net/~onion/test14.phpfor 문을 이용하여 i 값에 10보다 작을때까지 2씩 더하는 예제
http://onionmixer.net/~onion/test15.php$_GET 을 이용한 echo 문 예제
Nov 24, 2004 ¶
Nov 23, 2004 ¶
awk 문장 하나 더 ¶
Submitted by king @ 11-23 [04:35 pm]
# awk -F'-' '{ print $NF $(NF-1) $(NF-2) }'
\-F '-' : 구분자를 '-' 로 지정한다, 기본값은 ' ' 이다 (스페이스,탭)
NF : 필드의숫자를 지정해줌 (NF-1 은 NF 보다 하나 적은 자릿수)
NF : 필드의숫자를 지정해줌 (NF-1 은 NF 보다 하나 적은 자릿수)
예문) ms-kim-znc
결과값) znckimms (거꾸로 -가 없이 나열된다)
결과값) znckimms (거꾸로 -가 없이 나열된다)
mysql 파일에서 원하는것만 추출하기 ¶
Submitted by king @ 11-23 [03:53 pm]
- mysql 파일
ns:/tmp# cat mysql Mon Nov 22 04:00:00 KST 2004 Mon Nov 22 14:45:19 KST 2004 418-data/han662.pid 419-/bin/tar: Error exit delayed from previous errors 420-building file list ... done 421:han662data.gz 422:han662data.gz 423-wrote 6816186828 bytes read 10818965 bytes 211143.42 bytes/sec 424-total size is 6813642151 speedup is 1.00 425-Mon Nov 22 14:45:19 KST 2004 Uptime: 2183641 Threads: 601 Questions: 128667057 Slow queries: 145 Opens: 1400 Flush tables: 1 Open tables: 127 Queries per second avg: 58.923 | Max_used_connections | 649 | | Key_reads | 468 | | Key_read_requests | 8844554 | Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 3099260 1795896 1145932 62% / none 0 0 0 - /proc usbdevfs 0 0 0 - /proc/bus/usb none 0 0 0 - /dev/pts /dev/sda6 25711124 7192752 17212292 30% /env /dev/sda5 2063504 45800 1912884 3% /home none 1032220 0 1032220 0% /dev/shm /dev/sda3 2063536 328340 1630372 17% /var /dev/sdb1 70557052 23517372 43455584 36% /data 23G /data/mysqldata/data ns:/tmp# \
- get.sh
ns:/tmp# cat get.sh
#!/bin/sh
STARTTIME=`head -1 mysql | awk '{print }'`
echo "시작시간: $STARTTIME"
ENDTIME=`head --lines=2 mysql | tail -1 | awk '{print }'`
echo "끝난시간: $ENDTIME"
grep 'total size is' mysql | awk '{print }'
grep 'avg:' mysql | awk '{print }'
grep 'Max_used_connections' mysql | awk '{print }'
grep '\/data' mysql | awk '{print }'
ns:/tmp#
\
- 결과값
ns:/tmp# ./get.sh 시작시간: 04:00:00 끝난시간: 14:45:19 6813642151 58.923 649 36% ns:/tmp# \
나머지도 이런식으로 하면 된다 .png ":)")
wheel 그룹만 su 사용하기 ¶
Submitted by king @ 11-23 [11:35 am]
# cd /usr/bin # ls -l # chmod 4750 /bin/su # chgrp wheel /bin/su # vi /etc/group wheel:x:10:root,tongseob 이런식으로 추가 \
Nov 22, 2004 ¶
Submitted by king @ 11-22 [03:05 pm]
./bin/my_print_defaults: error while loading shared libraries: libcprts.so.5: cannot open shared object file: No such file or directory Installing all prepared tables ./bin/mysqld: error while loading shared libraries: libcprts.so.5: cannot open shared object file: No such file or directory Installation of system tables failed! \
Submitted by king @ 11-22 [11:40 am]
- 설정파일위치 : /etc/selinux/config
[root@wiki selinux]# cat config # This file controls the state of SELinux on the system. # SELINUX= can take one of these three values: # enforcing - SELinux security policy is enforced. # permissive - SELinux prints warnings instead of enforcing. # disabled - SELinux is fully disabled. #SELINUX=enforcing SELINUX=disabled # SELINUXTYPE= type of policy in use. Possible values are: # targeted - Only targeted network daemons are protected. # strict - Full SELinux protection. SELINUXTYPE=targeted \
- 끄는법
# setenforce 0 \
- 키는법
# setenforce 1 \
- /boot/grub/grub.conf 에서 selinux=0 부트플래그 옵션을 준다
Nov 18, 2004 ¶
화이트박스(WBEL) iso ¶
Submitted by king @ 11-18 [01:32 am]
- 화이트박스 리눅스 WBEL http://www.whiteboxlinux.org/
- ISO 받는곳
http://3es.atomicrocketturtle.com/iso/
(2004년 11월 18일 현재 이곳에는 FC2, FC3, WBEL, RH 7,3등이 있음)
http://3es.atomicrocketturtle.com/iso/liberation-respin1-binary-i386-2.iso
http://3es.atomicrocketturtle.com/iso/liberation-respin1-binary-i386-3.iso
http://www.whiteboxlinux.org/liberation-respin1-md5sums
Submitted by king @ 11-18 [12:11 am]
The following packages will be upgraded Canna-devel Canna-libs LPRng WindowMaker WindowMaker-libs XFree86-100dpi-fonts XFree86-75dpi-fonts XFree86-ISO8859-15-100dpi-fonts XFree86-ISO8859-15-75dpi-fonts XFree86-ISO8859-2-100dpi-fonts XFree86-ISO8859-2-75dpi-fonts XFree86-doc XFree86-font-utils XFree86-tools XFree86-truetype-fonts apache apache-devel apache-manual ark arpwatch arts arts-devel balsa bind bind-devel bind-utils cervisia cpp cups cups-devel cups-libs cvs dateconfig ddskk-xemacs epic ethereal ethereal-gnome evolution fetchmail fetchmailconf file fileutils gaim gal gal-devel galeon gcc gcc-c++ gcc-chill gcc-g77 gcc-java gcc-objc gdb gdm gettext gftp ggv gkrellm glibc glibc-common glibc-debug glibc-debug-static glibc-devel glibc-kernheaders glibc-profile glibc-utils gnupg grip gtkam gtkam-gimp gtkhtml gtkhtml-devel gv hanterm-xf hwdata iproute iptables iptables-ipv6 kaboodle kamera karm kcalc kcoloredit kde-i18n-Korean kdeaddons-noatun kdeadmin kdeartwork kdeartwork-kworldclock kdeartwork-locolor kdeartwork-screensavers kdegames kdegames-devel kdelibs kdelibs-devel kdemultimedia-arts kdemultimedia-devel kdemultimedia-kfile kdemultimedia-libs kdenetwork-devel kdenetwork-libs kdepasswd kdepim kdepim-cellphone kdepim-devel kdepim-pilot kdesdk-gimp kdesdk-kapptemplate kdesdk-kbabel kdesdk-kbugbuster kdesdk-kmtrace kdesdk-kompare kdesdk-kspy kdessh kdetoys kdevelop kdict kdvi kedit kfax kfile-pdf kfile-png kfloppy kfract kghostview khexedit kiconedit kit kjots kljettool klpq kmail kmid kmidi kmix knewsticker knode knotes koncd kooka korn kpaint kpf kppp krb5-devel krb5-libs krb5-server krb5-workstation kregexpeditor kregexpeditor-devel kruler kscd ksirc ksnapshot ktalkd ktimer kuickshow kview kviewshell kviewshell-devel kxmlrpcd lftp libao libao-devel libesmtp libesmtp-devel libgal19 libkscan libkscan-devel libmad libpcap libpng libpng-devel libstdc++ libstdc++-devel libusb libusb-devel lisa losetup lv lynx mailman man mgetty mgetty-sendfax mgetty-viewfax mgetty-voice micq mm mm-devel mod_auth_any mod_python mod_ssl modutils-devel mount mozilla mozilla-chat mozilla-devel mozilla-dom-inspector mozilla-js-debugger mozilla-mail mozilla-nspr mozilla-nspr-devel mozilla-nss mozilla-nss-devel mozilla-psm mysql mysql-devel mysql-server mysqlclient9 nasm nasm-doc nasm-rdoff nautilus nautilus-devel nautilus-mozilla netpbm netpbm-devel netpbm-progs netscape-common netscape-communicator netscape-navigator nfs-utils noatun nscd nss_ldap openldap openldap-clients openldap-devel openldap-servers openldap12 openssh openssh-askpass openssh-askpass-gnome openssh-clients openssh-server openssl openssl-devel openssl-perl openssl095a openssl096 pam pam-devel pam_smb pan perl perl-CGI perl-CPAN perl-DB_File perl-Digest-MD5 perl-NDBM_File perl-suidperl php-devel pine postfix postgresql postgresql-contrib postgresql-devel postgresql-docs postgresql-jdbc postgresql-libs postgresql-odbc postgresql-perl postgresql-python postgresql-server postgresql-tcl postgresql-tk psmisc pxe python python-devel python-docs python-tools python2 python2-devel python2-docs qt qt-MySQL qt-ODBC qt-PostgreSQL qt-Xt qt-designer qt-devel qt-static quota redhat-config-network redhat-lsb rhn_register rhn_register-gnome rsync rxvt samba samba-client samba-common samba-swat sane-backends sane-backends-devel scrollkeeper sendmail sendmail-cf sendmail-devel sendmail-doc shadow-utils sox-devel squid stunnel tar tcpdump tetex tetex-dvips tkinter tkinter2 ucd-snmp ucd-snmp-devel ucd-snmp-utils unzip up2date up2date-gnome util-linux vim-X11 vim-common vim-enhanced vim-minimal vnc vnc-doc vnc-server wget wordtrans wordtrans-kde wordtrans-qt wordtrans-web wu-ftpd xchat xinetd xpdf xpdf-chinese-simplified xpdf-chinese-traditional xpdf-japanese xpdf-korean ypserv yum zebra zlib zlib-devel The following packages have been kept back XFree86 XFree86-Xnest XFree86-Xvfb XFree86-base-fonts XFree86-devel XFree86-libs XFree86-twm XFree86-xdm XFree86-xf86cfg XFree86-xfs ghostscript gnomeicu gphoto2 gphoto2-devel kcharselect kdeaddons-kate kdeaddons-kicker kdeaddons-knewsticker kdeaddons-konqueror kdebase kdebase-devel kdebindings kdebindings-devel kdebindings-kmozilla kdeutils-laptop kdf klprfax libogg libogg-devel libvorbis libvorbis-devel mpg321 php php-imap php-ldap php-manual php-mysql php-odbc php-pgsql php-snmp sox sylpheed vorbis-tools xine \
Nov 16, 2004 ¶
Fedora Core 3 - nptl 확인여부 ¶
Submitted by king @ 11-16 [05:58 pm]
[root@ns lib]# getconf GNU_LIBPTHREAD_VERSION NPTL 2.3.3 [root@ns lib]# \
gentoo profile change ¶
Submitted by king @ 11-16 [11:08 am]
To upgrade do the following steps:
# emerge -n '>=sys-apps/portage-2.0.51' # cd /etc/ # rm make.profile # ln -s ../usr/portage/profiles/default-linux/x86/2004.2 make.profile or # ln -s ../usr/portage/profiles/default-linux/x86/2004.3 make.profile \
Nov 16, 2004 ¶
Nov 12, 2004 ¶
Nov 10, 2004 ¶
페도라 코어2 -> 코어3 업그레이드 (절차요약) ¶
Submitted by king @ 11-10 [11:51 am]
절차 요약 . (더 요약 할 것도 없네요. ^^)
1. 백업 해라.
2. rpm -q kernel kernel-smp
쓰지 않는 커널은 삭제 해라.
쓰지 않는 커널은 삭제 해라.
3. yum clean all
yum dir 을 깨끗이 ( 새로운 yum list 를 얻기 위해 )
yum dir 을 깨끗이 ( 새로운 yum list 를 얻기 위해 )
4. rpm -Uvh yum-2.1.11-3.noarch.rpm
다운받은 새로운 yum 으로 업그레이드.
다운받은 새로운 yum 으로 업그레이드.
5. rpm -Uvh fedora-release-3-8.i386.rpm
역시 다운받은 fedora-release 도 업그레이드
역시 다운받은 fedora-release 도 업그레이드
6. yum list updates
yum list 업데이트
yum list 업데이트
7. yum upgrade
이제 업그레이드 시작..
이제 업그레이드 시작..
8. Gnome 유저는 이렇게.
yum groupupdate "GNOME Desktop Environment"
(이렇게도 가능하군요. 몰랐음. )
yum groupupdate "GNOME Desktop Environment"
(이렇게도 가능하군요. 몰랐음. )
9. 재부팅.. 이상없기를..
틀린부분 지적 및 수정해주세요.
위 yum list 를 수작업으로 추가해 주어야 할 것이 있나요?
위 yum list 를 수작업으로 추가해 주어야 할 것이 있나요?
apt-get 으로 업그레이드 하는 방법도 있었죠?
Fedora Core2 -> Core3 Upgrade ¶
Submitted by king @ 11-10 [11:47 am]
Upgrading from Fedora Core 2 to Fedora Core 3 via Yum:
In general, if you're not cramped for space/time/something you should use
anaconda to upgrade. You'll find you come out with a much more reliable
upgrade process and much less pain. However, if you'd like to try to
upgrade the whole system via yum you should follow these instructions.
Before you start it would be a good idea to do the following:
- BACKUP YOUR DATA
- run rpm -q kernel kernel-smp
compare the results to the kernel you are running (uname -r).
run 'rpm -e' for each of the kernels that you are not using
ex:
rpm -e kernel-2.6.5-1.358 kernel-smp-2.6.5-1.358
This will make things a lot easier on you, trust me, and it frees up a HUGE
amount of disk space.
- clean up your yum dirs:
yum clean all
- download yum from the fedora core 3 tree and update it:
rpm -Uvh yum-2.1.11-3.noarch.rpm
http://download.fedora.redhat.com/pub/fedora/linux/core/3/i386/os/Fedora/RPMS/yum-2.1.11-3.noarch.rpm
- download fedora-release from the fedora core 3 tree and update it:
rpm -Uvh fedora-release-3-8.i386.rpm
http://download.fedora.redhat.com/pub/fedora/linux/core/3/i386/os/Fedora/RPMS/fedora-release-3-8.i386.rpm
- run a yum list updates to get the metadata and make sure everything is working:
yum list updates
you should see a lot of packages from that output.
- Now you're ready to run the update:
yum upgrade
- Let yum do it's thing (confirming when prompted, of course).
- For gnome users you will want to run:
yum groupupdate "GNOME Desktop Environment"
to get the latest set of packages for GNOME.
- Then reboot your system and make sure you select the new kernel as the default.
Good luck!
\Nov 09, 2004 ¶
설치된 젠투 백업받기 ¶
Submitted by king @ 11-09 [04:01 pm]
- 통짜로 백업하기
# tar cvzpf /mnt/backup/gentoobackup.tar.gz / --exclude=/mnt/backup \
- 디렉토리 별로 백업하기
# tar cvpzf /mnt/backup/gentoo.tar.gz /(파티션별 디렉토리) -X exclude_list 파티션별로 압축할때에 -X 옵션을 사용해서 exclude_list 파일내에 백업에 불필요한 디렉토리들을 /proc /tmp /usr/src/linux /mnt \
Nov 09, 2004 ¶
Nov 03, 2004 ¶
젠투에서 패키지명을 정확히 모를때... ¶
Submitted by king @ 11-03 [11:38 am]
[11:36] <@onion_athlon> emerge epm 하신다음 [11:36] <@onion_athlon> epm -qa | grep 패키지명 [11:36] <@onion_athlon> 이런식으로 찾은걸 unmerge해주시면 됩니다 \
Fedora yum mirrors ¶
Submitted by king @ 11-03 [10:33 am]
/etc/yum.conf
[main] cachedir=/var/cache/yum debuglevel=2 logfile=/var/log/yum.log pkgpolicy=newest distroverpkg=redhat-release tolerant=1 exactarch=1 retries=20 [fedora-us-2] name=Fedora Core 2 -- Fedora US mirror baseurl=http://mirrors.usc.edu/pub/linux/fedora/fedora/fedora/2/i386/RPMS.os [fedora-us-2-updates] name=Fedora Core 2 updates -- Fedora US mirror baseurl=http://mirrors.usc.edu/pub/linux/fedora/fedora/fedora/2/i386/RPMS.updates [fedora-us-2-stable] name=Fedora Linux (stable) for Fedora Core 2 -- Fedora US mirror baseurl=http://mirrors.usc.edu/pub/linux/fedora/fedora/fedora/2/i386/RPMS.stable [livna-stable] name=Livna.org Fedora Compatible Packages (stable) baseurl= http://rpm.livna.org/fedora/$releasever/$basearch/yum/stable #[livna-unstable] #name=Livna.org Fedora Compatible Packages (unstable) #baseurl=http://rpm.livna.org/fedora/$releasever/$basearch/yum/unstable #[livna-testing] #name=Livna.org Fedora Compatible Packages (testing) #baseurl=http://rpm.livna.org/fedora/$releasever/$basearch/yum/testing [freshrpms] name=Fedora Linux $releasever - $basearch - freshrpms baseurl=http://ayo.freshrpms.net/fedora/linux/$releasever/$basearch/freshrpms \
/etc/sysconfig/rhn/source
yum fedora-us-core-2 http://mirrors.usc.edu/pub/linux/fedora/fedora/fedora/2/i386/RPMS.os yum fedora-us-updates-2 http://mirrors.usc.edu/pub/linux/fedora/fedora/fedora/2/i386/RPMS.updates yum fedora-us-stable-2 http://mirrors.usc.edu/pub/linux/fedora//fedora/fedora/2/i386/RPMS.stable yum livna-stable-fc2 http://rpm.livna.org/fedora/2/i386/yum/stable #yum livna-testing-fc2 http://rpm.livna.org/fedora/2/i386/yum/testing #yum livna-unstable-fc2 http://rpm.livna.org/fedora/2/i386/yum/unstable yum freshrpms http://ayo.freshrpms.net/fedora/linux/2/i386/freshrpms \
Fedora mirrors ¶
Submitted by king @ 11-03 [10:30 am]
참고로 한국은
Korea
* ftp://ftp.kreonet.re.kr/pub/Linux/fedora/core/
* rsync://ftp.kreonet.re.kr/fedora/core/
* ftp://mirror.hostway.co.kr/pub/fedora/
* ftp://ftp.kaist.ac.kr/pub/fedora/linux/core/
\
Nov 03, 2004 ¶
모니위키에서 C 코드 넣을때 ¶
Submitted by king @ 11-03 [01:57 am]
[01:55] <hyungoo_Zilla> {{{#!vim c
[01:55] <hyungoo_Zilla> 소스코드
[01:55] <hyungoo_Zilla> \\}}}
[01:56] <hyungoo_Zilla> 모니위키에서 이렇게 해주면 되네요 :)
\#include <stdio.h> void main(){ printf("Hello World"\n); } \
Nov 01, 2004 ¶
데비안 runlevel 관리하기 ¶
Submitted by king @ 11-01 [04:35 pm]
: 그리고 시작프로그램(-_-a) 등록할때 젠투에서는 'rc-update'를 사용하는데 요.
:
: 데비안에도 그런 프로그램이 있는지요.
:
: 공부가 부족해서 어이없는 질문 드린게 아닌지.. ^-^;;;
:
: 데비안에도 그런 프로그램이 있는지요.
:
: 공부가 부족해서 어이없는 질문 드린게 아닌지.. ^-^;;;
데비안에서 유사한 프로그램으로는 update-rc.d가 있습니다.
(패키지 설치시 이러한 것들은 주로 패키지내의 스크립트들에 의해서
저절로 실행/설치되며, 이 스크립트들은 /var/lib/dpkg/info에
"패키지명.확장자(preinst,prerm,postinst,postrm,conffile,..)"
으로 들어있습니다.)
update가능한 류는 대부분 "update-"로 시작됩니다.
예를 들면, update-menus, update-rc.d, update-alternatives, .., 등
"update-"치고 <tab>을 치면 해당되는 유틸리티들이 주욱 나옵니다.
(패키지 설치시 이러한 것들은 주로 패키지내의 스크립트들에 의해서
저절로 실행/설치되며, 이 스크립트들은 /var/lib/dpkg/info에
"패키지명.확장자(preinst,prerm,postinst,postrm,conffile,..)"
으로 들어있습니다.)
예를 들면, update-menus, update-rc.d, update-alternatives, .., 등
"update-"치고 <tab>을 치면 해당되는 유틸리티들이 주욱 나옵니다.
- 참고로 start-stop-daemon 도 있다고함 (from sCag)
